Applications
Six plant applications drawn from the process to the control system. Each shows what is measured, where, why it matters and how the signal reaches the PLC, DCS or SCADA — the same path an engineering conversation follows.
01Application index
Every application below is a typical arrangement with its measurement points in place — open one to explore each point, the technology behind it and how it is integrated.
APP-01PT · TT · MT · PDT · FT
Pressure, dew point, flow and temperature across compressors, dryers and distribution.
Measurement points
APP-02AT · FSL · PT · TT
Online analyzers with sample extraction, conditioning and control-system integration.
Measurement points
APP-03LT · PT · LSHH · TT · FT
Continuous level, point level, temperature and pressure for storage and process tanks.
Measurement points
APP-04LT · FT · PT · AT
Drum level, steam flow, pressure, temperature and flue-gas oxygen measurement and control.
Measurement points
APP-05AT · FT · PDT · LT
pH, conductivity, dissolved oxygen, turbidity and chlorine with flow and level context.
Measurement points
APP-06IO · GW · HMI · DB · CUT
Brownfield modernization of control systems with planned cut-over and minimal disruption.
Migration interfaces
02Application-first
An instrument is only the right choice in its setting. The work runs from what the process needs, to where it happens, to the measurement that answers it — and only then to the equipment and the system around it.
01Problem
A quality to confirm, a loss to find, a risk to control, a system to keep running.
ExampleMoisture reaching tools and product at the points of use.
02Application
The equipment, the medium, the operating conditions and the constraints of the installation.
ExampleCompressed air — compressor, receiver, dryer, filter, distribution.
03Measurement
Each point placed with a reason, and a defined path from the instrument to the control system.
ExampleMT-103 — pressure dew point after the dryer.
04Solution
Instruments, analyzers and control selected, integrated, commissioned — and then supported.
ExampleDew-point transmitter in a sampling block, alarmed and trended in SCADA, with a calibration plan.
Engineering enquiry
The six applications here are common starting points, not the limit. Describe the process, what needs to be measured or controlled, and the system it must connect to.